Home About us Contact us
         
         
INTERNATIONAL JOURNAL OF APPLIED RESEARCH IN MECHANICAL ENGINEERING
(IJARME)

ISSN: 2231 –5950

Aim

Recent developments in technology, an engineer has to realize that a branch of engineering is not only limited to an independent domain, but also delve into other branch of engineering. The mechanical engineering research has become very sophisticated with the introduction of computers and electronics and paved the way for the emergence of new technologies. Globalized competitiveness and increased awareness of the environment have made the mechanical engineering research significantly different with more emphasis on competitive technologies and management approaches.

The International Journal of Applied Research in Mechanical Engineering (IJARME) is a refereed, interdisciplinary journal that publishes theoretical and experimental research, their applications and future trends relevant to various streams of mechanical engineering. The IJARME publishes original research work with special emphasis on research and development in mechanical engineering that contributes significantly to further the knowledge in mechanical engineering and technology. IJARME also provides discussion and the exchange of information on all important aspects of classical and modern mechanical engineering. In addition IJARME covers all sustainable development aspects related with mechanical engineering. The objective of this journal is to reflect the changes in various disciplines in mechanical engineering scenario and provide a platform for future growth. IJARME also invites special issues and guest edited volumes from professors and researchers on various topics of Mechanical Engineering.

Topic Coverage

Topics to be discussed in this journal include (but are not limited to) the following:

• Aerodynamics and fluid mechanics
• Automation, Mechatronics, and Robotics
• Automotive engineering
• Bioengineering materials, biomechanics and biotribology
• Bulk deformation processes and sheet metal forming
• Composites, ceramics, and polymers processing
• Computational mechanics / FEM modeling and simulation
• Computer-based manufacturing technologies: CNC, CAD, CAM, FMS, CIM
• Concurrent engineering
• Corrosion, Heat treatment, microstructure and materials properties
• Cryogenics
• Dynamic system analysis
• Energy conservation and auditing
• Expert system
• Failure and fracture mechanics
• Friction, wear, tribology, and Surface engineering
• Functionally graded materials, cellular materials
• Heating and ventilation air conditioning system
• High speed machining
• Hydrostatic transmissions and pneumatics
• I.C engines and Turbo machinery
• Kinematics and dynamics of rigid bodies
• Lubricants and lubrication
• Machinability and formability of materials
• Manufacturing design for 3r “reduce, reuse, recycling”
• Mechanical micro machining
• Mechanisms and machines
• Medical device manufacturing
• Metal casting, metal joining processes
• Metrology and computer aided inspection
• Micro and nanomechanics
• Modeling, simulation, and optimization
• Multifunctional and smart materials
• Nanomaterials and nanomanufacturing
• Precision engineering
• Product design and development
• Rapid manufacturing technologies and prototyping, remanufacturing
• Recycling systems
• Renewable energies technology
• Reverse engineering
• Sensors for intelligent manufacturing and artificial intelligence
• Soft computing techniques
• Solid mechanics and structural mechanics
• Sustainable and green manufacturing
• Thermodynamics and heat transfer
• Tool condition monitoring
• Traditional and non-traditional machining processes
• Vibration and acoustics

Instruction to Authors

Submitted papers should not have been previously published nor be currently under consideration for publication elsewhere (N.B. Conference papers may only be submitted if the paper was not originally copyrighted and if it has been completely re-written). All papers are refereed through a double blind review process. A guide for authors, sample copies and other relevant information for submitting papers are available on the  Submission of Papers page.

Note: Authors are required to submit their papers in the MS Word format to the following Email id with a copy to the Editor- in-Chief of the Journal. Please mention the title of the Journal in subject area to which you are submitting your paper.
Mail To : ioaj.publishing@gmail.com

Please include in your submission the title of the Journal

Editors and Members of the Editorial Board


Editor- in-Chief

DR. CH R. VIKRAM KUMAR
Dept. of Mechanical Engineering
N.B.K.R.I.S.T, Vidyanagar
Nellore(dt) Andhra pradesh
India – 524 413
ijarme.editor@gmail.com

Email To:
Technical Editor(Secretary)

Prof. Anjan Kumar Sahoo,
Department of Computer Science & Engineering ,
IIMT, Bhubaneswar ,
Contact No: 07381067753.
Email: ioaj.publishing@gmail.com

Editor

DR. D. S. SRINIVAS
Research Fellow,
Faculty of Engineering
The University of Nottingham
University Park Nottingham, NG7 2RD

Associate Editor

Dr. Sushovan Chatterjee
Asst. Professor,
Department of Mechanical Engineering,
National Institute of Technology, Silcher
Assam Pin code: 788010

Venkateswaran P
Corporate Technology, Research and Technology
Centre Siemens Technology and Services Private Limited
Bangalore 560100, India

Members of the Editorial Board and Review Board

Prof. Qiusheng Yan
Faculty of Electro-Mechanical Engineering
Guangdong University of Technology
Add. No.100, Waihuan West Road,
Guangzhou Higher Education Mega Center Guangzhou,
P.R.China 510006

Prof. Quan Yanming
School of Mechanical and Automotive Engineering 
South China University of Technology
WUSHAN ROAD Guangzhou
China- 510640

Dr. I-Ling Chang, Associate Professor
Department of Mechanical Engineering
National Cheng Kung University
No. 1, University Road, Tainan
701, Taiwan

Dr. Mohammad Israr [Principal]
Balaji Engineering College,Junagadh
Gujarat-362014, India
PhD [Mechanical Engineering]
“Analysis of Industrial Benchmarking Practices in Manufacturing System with Special Focus on Logistics Parameters”
M.E.[Industrial Engg.& Management], B.E. [Mechanical Engineering]

SUBHA K. KUMPATY, Ph.D., D.Min., P.E.
Professor of Mechanical Engineering
Program Director of Master of Science in Engineering
Milwaukee School of Engineering
1025 N. Broadway
Milwaukee, WI 53202
Ph. (414) 277 7466, Fax. (414) 277 7465

Prof. (Dr.) G. Subba Rao, Principal
Geethanjali Institute of Science and Technology
3rd Mile, Bombay Highway
Gangavaram (V), Kovuru (Md.)
S. P. S. R, Nellore Dt. - 524 137
Andhra Pradesh, India

Prof. R. K. Sinha, Deputy Director
Durgapur Institute of Advanced Technology and Management
G. T. Road, Rajbanddh, Durgapur
West Bengal, India

DR. FATHI BOUD,
Research Fellow
Manufacturing Main Labs
Department of Mechanical, Materials and Manufacturing Engineering
University of Nottingham
University Park, Nottingham, NG7 2RD, United Kingdom

DR. PETER KRAJNIK,
KTH Royal Institute of Technology
Department of Production Engineering
Brinellvägen  68
100 44 Stockholm, Sweden

DR. SANTHOSH KUMAR. N,
Assistant Professor
Department of Mechanical Engineering
N.S.S College of Engineering
PALAKKAD 678008

DR. B. SRIRANGACHARYULU,
Nano Science Building
Department of Mechanical Engineering
II Floor, Room # 304A
NIT Calicut - 673601.

DR. BINU C. YELDOSE,
Faculty in Mechanical Engineering Department,
Mar Athanasius College of Engineering,
Kothamnaglam P.O,
Kerala – 686666

DR. N. VENKAIAH,
Assistant Professor
Department of Mechanical Engineering
National Institute of Technology Warangal
Warangal-506 004, India.

DR. MANESH K. K,
Asst. Professor in Mechanical Engg.,
Govt. Engineering College Idukki,
Painavu, Idukki, Kerala-685603.

DR. LOKIREDDI VENKATA VENU GOPALA RAO,
Associate professor,
M.V.G.R. College of Engineering,
Vizianagram.

DR. DINESH THAKUR, 
Department of Mechanical Engineering
Dr. B. A. Technological University
LONERE-402 103
Tal. Mangaon Dist. Raigad
MAHARASHTRA

DR. R. ELANSEZHIAN,
Associate Professor,
Dept. of Mechanical Engineering
Pondicherry Engineering College
Pondicherry – 605014

DR. S. ARUL,
Professor and Head,
Department of Mechanical Engineering,
Panimalar Engineering College,
Chennai - 600 123
TN, INDIA

DR. R.MANU,
Assistant Professor
Mechanical
CAD/CAM Centre ( First Floor )
NIT Campus P.O., Calicut 673601

DR. S. SRINIVAS
Asst.Professor
Dept. of Mechanical Engg.
BMS College of Engg.
Bangalore-560 019
India

DR. SADIQ. A,
Computer Integrated Manufacturing Lab
Dept. of Mechanical Engineering
TKM College of Engineering
Kollam, KERALA - 691005 INDIA

DR. JANET FOLKES,
Room A54, Coates building
University Park
University of Nottingham, Nottingham
NG7 2RD


»Aims
»Topic Coverage
»Instruction to Authors
»Editorial Board
 
IJARME is indexed in:
 
• IJARME Google Scholar Profile
 
«Browse Recent Issues»
 
 
 
 
  TradeMark 2011 IOAJ  
« »